Skip to content 
Our Post Constructions Cleaning service specializes in transforming construction sites from chaotic to immaculate.
Our commitment goes beyond cleanliness - we promise to resolve any concerns or issues fully within 72 hours. Your satisfaction is our priority, ensuring that every experience with Angel Cleaning service leaves you smiling.
(1) Remove any or all trash, dirt, and debris from the exterior of the unit and dispose of as directed by team manager.
(2) Clean all tubs, toilets, lavatories, kitchen sinks and appliances. Remove any and all temporary protection and labels not required to remain.
(3) Clean all kitchen countertops and vanity tops. Clean out all kitchen cabinets and vanity cabinets.
(4) Scrape and wash the inside and outside surfaces (If reachable) of all windows and sliding glass doors. We always keep in mind that do not scrape windows or scratch panels/frames.
(5) Clean all windows and sliding glass door frames, sills, and tracks. Vacuum tracks as required, giving special attention to windows and tracks above stairways.
(6) Clean all utility closets, furnace closets, storage areas, garages, etc.
(7) Clean all water heaters.
(8) Clean water washing machine/dryer area.
(9) Other cleaning required by site manager.
(5) Clean all windows and sliding glass door frames, sills, and tracks. Vacuum tracks as required, giving special attention to windows and tracks above stairways.
(6) Clean all utility closets, furnace closets, storage areas, garages, etc.
(7) Clean all water heaters.
(8) Clean water washing machine/dryer area.
(9) Other cleaning required by site manager.
Angel cleaning offers complete post construction cleaning services Auckland and North Shore. The following is a general checklist of our final clean specifications. Please note, we recognize each project is unique and may require alterations or deviations from this list.
(1) Remove any or all trash, dirt, and debris from the interior of the unit and dispose of as directed by the site manager.
(2) Clean and polish kitchen cabinets, kitchen countertops, and vanity tops. Vacuum the inside of all cabinets, as required to remove dirt and debris. Polish all cabinets, vanities, and other stained woodwork and all stainless steel sinks using oil polish.
(3) Clean and shine the inside and outside surfaces of all windows and sliding glass doors.
(4) Clean and shine all plumbing fixtures and related trim to a sanitary condition. Clean and shine all medicine cabinets, mirrors, and bath accessories.
(5) Clean and shine all electrical fixtures and trim.
(6) Clean and shine all appliances. Remove all packing materials, temporary labels, and operating and maintenance manuals. Place in kitchen drawers as directed.
(7) Clean all wood base, casing, and sills. Clean all metal and wooden shelving.
(8) Clean the outside and inside of all exterior doors, including the threshold. Clean and shine all interior doors.
(9) Sweep and mop all hard floors. Damp mop hard floors using a shine and conditioner in the mop water.
(10) Sweep all exterior storage areas, garages, patios and stoops.
(11) Dust or vacuum walls as needed.
Optimized by Seraphinite Accelerator